Architectural sheet numbering¶
Status: Current series assignments; example numbering is draft
Last revised: November 17, 2026
Series assignments¶
| Series | Content |
|---|---|
| A0 | General information and schedules |
| A1 | Site |
| A2 | Plans |
| A3 | Exterior elevations |
| A4 | Sections |
| A5 | Enlarged plans and interior elevations |
| A6 | Construction details |
| A7 | Diagrams |
| A8 | Reserved |
| A9 | Reserved |
The A0–A9 assignments above are the current AMA office organization. They describe this office's system and do not claim compliance with a separate national sheet-numbering standard.
Draft sheet format¶
Use A + series digit + two-digit sequence, beginning at 01 within each series. Examples: A001 for an A0 sheet, A201 for an A2 sheet, and A601 for an A6 sheet. Confirm this full-number format before adopting it in an existing project.
| Example | Example sheet title |
|---|---|
| A001 | GENERAL INFORMATION |
| A002 | SCHEDULES |
| A101 | SITE PLAN |
| A201 | FLOOR PLANS |
| A301 | EXTERIOR ELEVATIONS |
| A401 | BUILDING SECTIONS |
| A501 | ENLARGED PLANS AND INTERIOR ELEVATIONS |
| A601 | CONSTRUCTION DETAILS |
| A701 | DIAGRAMS |
Coordination¶
- Include only the sheets needed for the project; unused series do not require placeholder sheets.
- Keep A8 and A9 unassigned until an office decision establishes their purpose.
- Maintain one coordinated sheet index and verify all view references against it before issue.
- Do not renumber issued sheets without updating the index, references, and issue record.
Related: Drawing naming · Tagging protocols